Products
  ULTRA Bright Nav lights / Battery Low Warning / BEC
.Catagories     BL-NavLV-N (Nav / low bat)     Ultra bright, with controller board / low battery flash sequence Scale Aircraft
 
 

- ULTRA bright double blink strobe / beacons and landing lights
- 8 (expandable to 16) Ultra Bright 11,000 mcd per LED lights
- Navigation / Strobe / Landing (red, green, and white)
- Two low battery modes (Time and/or low Voltage)
- RC Tx input (Lights on/off, Landing lights coincident with gear down)
- Servo output to activate parachute when low battery
- Small warning LED on controller board: Battery low or very low
- Redundant battery can be connected to the controller
- A 5V BEC output In case of LiPo failure or for other lights
- Set up via on board DIP switches + free PC tool for advanced features
- Powered from 5v to 26V, no need to connect main LiPo


.Gyros
.Auto pilot 
.Nav Lights 
...$87.55
.Multi-Copt  
.LiPoly safe
BL-NavLV-N (5mm Ultra)
.SmartSW

Scale Airplane / Multi-copter
Dusk and night flying

 
 
Adds fun, authenticity and safety to any aircraft
BL-NavLV-S (Nav / low bat)     Super bright, with controller board / low battery flash sequence Day-time visibility
  - SUPER bright double blink strobe / beacons and landing lights
- 8 (expandable to 11) Super Bright 100 lumens per LED lights
- Navigation / Strobe / Landing (red, green, and white)
- Two low battery modes (Time and/or low Voltage)
- RC Tx input (Lights on/off, Landing lights coincident with gear down)
- Servo output to activate parachute when low battery
- Small warning LED on controller board: Battery low or very low
- Redundant battery can be connected to the controller
- A 5V BEC output In case of LiPo failure or for other lights
- Set up via on board DIP switches + free PC tool for advanced features
- Powered from 5v to 26V, no need to connect main LiPo
 
.$163.25
BL-NavLV-S (20mm Super)
.T-Shirts etc
Airplane / UAV / Heli
Daylight and night flying 		 
 
Adds daylight visibility to any aircraft - Note: light backs get hot (70C in super bright mode)

- Excellent Quality Nav / Landing and Strobe lights with easy to set up DIP switches
- BL-NavLV-N can be seen from over 100m away at dusk / night. (Av. 11,000 mcd per LED) for distance flying or just better visibility
- BL-NavLV-S can be seen from 100's of feet away in daytime! 1km at night. (Av. 100 lumens per LED)
- Two modes allow half or full brightness
- Can take power from your main battery (up to 26v / 6s), or from any other source, typically a small 9V battery
- Controller board is 80x 50 mm, 8 LEDs with leads of length 1m (39") each (Can power additionalLEDs)
- Contoller weight 45g (1.6 oz), x 8 LED cables (1m) 30g (1 oz) for BL-NavLV-N (x8 LED cables 97g for BL-NavLV-S)
- Input RC Rx channel for on / off / Landing lights (2 or 3 way RC Tx switch supported)
- Low voltage mode can be set from 1 to 6 cells, and / or timer from 5 mins to 60 mins. (Alarm Snooze mode available)
- Output RC channel for external device control when battery low detected (such as parachute deployment servo)
- RC out is back up power supply for your RC Rx (3A BEC). Rest assured if your Li-Po dies your RC Rx and servos won't
- Optional free PC (Windows) status software (+advanced set ups) available
- Truly original and top quality product at an unbeatable price!

 
 
 
Warning : In ultra and super bright modes these lights are very bright, please avoid direct close up eye contact
 
How bright are they?
Click here		 Take care to order the correct version
BL-NavLV-N (5mm LEDs)
- 11,000 mcd brightness per LED 		  BL-NavLV-S (20mm LEDs)
- 100 lm brightness per LED
Blinking nav and beacon lights
A truley unique and very high quality Bluelight-tech design (LiPo voltage measurement accurate to 0.2%) Optional PC set up tool click here  
                                           
Additional (optional) Parts for BL-NavLV and other stand alone products:
BL-Nav16U : 16 LED upgrade kit Contains: (for BL-NavLV-N)
x 8 : Additional ultra bright 5mm LEDs (incl. Fresnel lenses)
x 1 : 4 meter black / 4 meter red LED connection wire
x 2 : 39 ohm in-line resistors for red LEDs
 ...$15.45  
   
 
Upgrades the BL-NavLV-N to full 16 LEDs total solution with NO loss of brightness on any LED
BL-NavSLED : Super Bright LED Contains: (for BL-NavLV-S) - Choose color at checkout
x 1 : Additional super bright LED light (star board + lens)
x 1 : 1 meter black / 1 meter red LED connection wire
x 2 : In-line protection resistors (Items not connected, parts only) 		$5.45  
   
  1W light
Upgrades the BL-NavLV-S with extra LED for any of the flashing outputs (NOT for constantly on outputs)
BL-NavCon : 1-2 T Connector Contains: (for BL-NavLV-N/S)
x 1 : One male to two female T connector harness (10 AWG / 16 AWG). Suitable for connections up to 8s / 100A.
 ...$11.55  
  free shipping
 
Allows BL-NavLV to be connected with main LiPo battery
BL-C12V : 5V to 12V (1.2A) conv. Contains: (can use with BL-NavLV-N/S or other supply)
x 1 : Converter module 5.2v to 12v
Note: Converts from 5.0~12.6v to 12v (Above 6W need HS)
$8.25  
  (stock soon)
   
Allows any 12v LED strip or other LED light operating at 12V to connect to the BL-NavLV BEC output (drives x3 BL-HL12V1W)
BL-3HL1W : LED Headlights Contains: (can use with BL-NavLV-N/S or other supply)
x 3 : Super bright headlight (plastic module with 100° lens) + driver
x 3 : 3 feet (92 cm) cable + 3 pin connector per light
x 3 : Heat sink + stick pad (optional to use if poor airflow) 		$27.65  
   
  3.6W light
At 22mm (<1") diameter x 16mm (0.6") long, and 10g (w/o cable) gives approx 3 x 90 lumens of light
BL-1HL6W : LED Headlight kit Contains: (can use with BL-NavLV-N/S or other supply)
x 1 : Super bright headlight (plastic module with 170° lens)
x 1 : 3.3 feet (1m) cable + 3 pin connector
Note: Includes const. current driver
$18.25  
  (stock soon) (soon)
  6W light
At 18mm (<3/4") diameter x 37mm (1.5") long, and 10g (no cable) gives approx 500 lumens of light (Cree LED)
BL-1HL7W : LED Headlight Contains: (can use with BL-NavLV-N/S or other supply)
x 1 : Super bright headlight (plastic module with 100° lens)
x 1 : 6 feet (1.8 m) cable + 3 pin connector

$19.25  
(stock soon) (soon)
 
7W light
 
At 18mm (<3/4") diameter x 37mm (1.5") long, and 10g (no cable) gives approx 600 lumens of light (Cree LED)
BL-BlueS24 : Dual blue strip lights Contains: (can use with BL-NavLV-N/S or other supply)
x 2 : 20 cm (8") blue LED strip with 12 LEDs (waterproof) + tape
x 1 : LED driver (5~12.6v input to 12v out) , drives 2 strips
Note: Each strip at 3.1 watts of power, total power > 6W 		$13.52  
(stock soon).
 
6W light.
 
2 strips with 24 LEDs (total) plugs directly into any 5v (1.5A) supply such as BL-NavLV BEC o/p to give >6W cool blue wing detail
BL-BlueS42 : Dual blue strip lights Contains: (Direct connection to LiPo battery or similar)
x 2 : 35 cm (14") blue LED strip w/ 21 LEDs (waterproof) + tape
x 2 : LED driver (6.6~25.2v input to12v out) for constant brightness
Note: Each strip at 5.72 watts of power, total power > 10W 		$18.52  
  .
  11W light.
2 strips with 42 LEDs (total) plugs directly into 2s, 3s, 4s, 5s or 6s LiPo or balance connector
BL-BlueR5 : 5m Blue LED strip Contains:
- 5m (16.5 feet) reel ultra bright LEDs (SMD 5050)
- 60 LED/m. Blue strip / white PCB / 12V DC
- Can cut every 3 LEDs
$39.22  
   
  14.4W/m.
Ultra bright strip lights
    Copyright © 2013~2014 Bluelight Technologies